About
Infusion device Analyzers
IDA-6 Infusion Device Analyzer
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA™ workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
Key Features :
- OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
- Achieve low-flow stable readings 100x faster than IDA-5
- IntelliPump Technology offers no mess testing with a water recirculation system
- No priming required between tests or repriming after initial setup
- Test up to four infusion pumps simultaneously
- Modular design allows for flexibility; users may add additional channels as needed
- Removable channels simplify the calibration process and eliminate downtime
- Fully compliant with IEC60601-2-24 standard
- Enhanced resolution by 60x vs. IDA-5
- Meets or exceeds most OEM low-flow accuracy
- Flow and volume are 100x more accurate vs. IDA-5
- Simply and quickly customize pre-built test procedures for any infusion device
- Wireless capability allows you to run test procedures in the field and automatically sync results
- Large 10” touchscreen with an intuitive user interface
- Ability to upload pictures, instructions, and text to procedures
- Global support network to support customers anywhere, anytime
- Immediate results with as little as 0.003mL
- Verifies PCA, bolus, and occlusion functionality
IDA-5 Infusion Device Analyzer
Fast, accurate and proven infusion device analyzer helps increase productivity
Based on sophisticated measurement technology trusted by biomedical professionals around the world, the IDA-5 is a multi-channel infusion device analyzer that can test up to 4 infusion pumps at once. The IDA-5 has built-in automation allowing users to create custom test templates for quick, standardized testing of IV pump devices with minimal user intervention.
Key Features :
- Compatible with virtually any type of infusion device
- Tests up to four infusion pumps at the same time
- Customizable test templates for quick and standardized infusion device testing
- Real-time snapshots of flow and pressure for immediate issue recognition
- Convenient and easy data entry with plug-n-play, USB compatible, keyboard or barcode scanner
- Instantaneous and average flow measurement of up to 1500 ml/hr
- Single-flow, dual-flow (piggyback) and PCA testing
- Ability to automatically end flow measurement based on user-defined time, volume or both
- Auto-start mode enables unit to begin testing only when fluid is detected to maximize accuracy
- Built-in memory to save test results for printing or downloading to computer
- Compatible with a wide variety of off-the-shelf printers
- Optional automation software completely integrates medical device testing including electrical safety, visual inspection and other performance parameters for total digital data management
- Tethers with other Fluke Biomedical automated test devices for harmonized workflow and reporting
- Global support network delivers prompt service to Fluke Biomedical customers worldwide
IDA-1S Infusion Device Analyzer
The portable, high-performance infusion device analyzer designed for testing on-the-go.
Users who want fast verification of infusion device performance, plus the mobility to do preventive device maintenance in multiple locations, prefer manual testing, or only need a one-channel analyzer, will find the IDA-1S infusion device analyzer the perfect choice. It’s a portable, battery-operated analyzer that allows for easy traceability of test results without the complexity of other infusion pump testers.
Key Features :
- Integrated carrying handle and lightweight for easy portability
- Battery provides up to 10 hours of continuous performance for on-the-go operation
- Compatible with a wide variety of infusion pumps
- Ensures maximum accuracy with Autostart mode enabling unit to begin testing only when fluid is detected
- Based on technology that is proven and trusted worldwide
- On-board memory allows test results storage instantly
- LCD touchscreen for ease of use
- Average and instantaneous flow measurement
- Occlusion pressure measurements to 45 psi
- Hydrograph graphical software to control unit, display results and print results via PC
- Hydrograph graphical software to control unit, display results and print results via PC
- Global sales, service and support
Related Products
IDA-5 Infusion Device Analyzer
Fast, accurate and proven infusion device analyzer helps increase productivity
Based on sophisticated measurement technology trusted by biomedical professionals around the world, the IDA-5 is a multi-channel infusion device analyzer that can test up to 4 infusion pumps at once. The IDA-5 has built-in automation allowing users to create custom test templates for quick, standardized testing of IV pump devices with minimal user intervention.
Key Features :
- Compatible with virtually any type of infusion device
- Tests up to four infusion pumps at the same time
- Customizable test templates for quick and standardized infusion device testing
- Real-time snapshots of flow and pressure for immediate issue recognition
- Convenient and easy data entry with plug-n-play, USB compatible, keyboard or barcode scanner
- Instantaneous and average flow measurement of up to 1500 ml/hr
- Single-flow, dual-flow (piggyback) and PCA testing
- Auto-start mode enables unit to begin testing only when fluid is detected to maximize accuracy
- Ability to automatically end flow measurement based on user-defined time, volume or both
- Compatible with a wide variety of off-the-shelf printers
- Built-in memory to save test results for printing or downloading to computer
- Optional automation software completely integrates medical device testing including electrical safety, visual inspection and other performance parameters for total digital data management
- Tethers with other Fluke Biomedical automated test devices for harmonized workflow and reporting
- Global support network delivers prompt service to Fluke Biomedical customers worldwide
IDA-6 Infusion Device Analyzer
The future of biomedical testing is now: introducing the revolutionary IDA-6 Infusion Device Analyzer, enabled with OneQA™ workflow automation software to help simplify the biomedical testing process.
The IDA-6 is 100x faster than the IDA-5 and with access to our proprietary OneQA software onboard, testing and documenting results is fully automated saving you valuable time while increasing accuracy. OneQA allows users to customize pre-built procedures on IDA-6, results are automatically saved on the device with the option of syncing to your PC simultaneously. Completing your PMs have been simplified with our intuitive user interface.
Key Features
- OneQA-enabled workflow automation simplifies testing, enhancing accuracy and efficiency
- Achieve low-flow stable readings 100x faster than IDA-5
- IntelliPump Technology offers no mess testing with a water recirculation system
- No priming required between tests or repriming after initial setup
- Test up to four infusion pumps simultaneously
- Modular design allows for flexibility; users may add additional channels as needed
- Removable channels simplify the calibration process and eliminate downtime
- Fully compliant with IEC60601-2-24 standard
- Meets or exceeds most OEM low-flow accuracy
- Enhanced resolution by 60x vs. IDA-5
- Flow and volume are 100x more accurate vs. IDA-5
- Simply and quickly customize pre-built test procedures for any infusion device
- Wireless capability allows you to run test procedures in the field and automatically sync results
- Large 10” touchscreen with an intuitive user interface
- Ability to upload pictures, instructions, and text to procedures
- Global support network to support customers anywhere, anytime
- Immediate results with as little as 0.003mL
- Verifies PCA, bolus, and occlusion functionality
IDA-1S Infusion Device Analyzer
The portable, high-performance infusion device analyzer designed for testing on-the-go.
Users who want fast verification of infusion device performance, plus the mobility to do preventive device maintenance in multiple locations, prefer manual testing, or only need a one-channel analyzer, will find the IDA-1S infusion device analyzer the perfect choice. It’s a portable, battery-operated analyzer that allows for easy traceability of test results without the complexity of other infusion pump testers.
Key Features :
- Integrated carrying handle and lightweight for easy portability
- Battery provides up to 10 hours of continuous performance for on-the-go operation
- Compatible with a wide variety of infusion pumps
- Ensures maximum accuracy with Autostart mode enabling unit to begin testing only when fluid is detected
- Based on technology that is proven and trusted worldwide
- On-board memory allows test results storage instantly
- LCD touchscreen for ease of use
- Average and instantaneous flow measurement
- Occlusion pressure measurements to 45 psi
- Hydrograph graphical software to control unit, display results and print results via PC
- Global sales, service and support
